DC Powered BLE PIR Occ Control (SkyFi Blu) (06262)
The SkyFi Blu Pro 06262 is a QSR snap-in wireless PIR motion sensor designed for Network Lighting Controls. It uses SIG Qualified Bluetooth Mesh and supports a maximum mounting height and detection range of 17 feet.
The sensor operates at DLC 12V with a maximum input current of 25mA. It uses Bluetooth version 4.2, operates at a listed radio frequency of 2.4GHz ±75Hz, and provides a maximum Bluetooth transmit distance of 80 feet.
The free MES iOS and Android app supports onsite commissioning, including areas, grouping, zoning, and profile creation. Profiles can include high- and low-end trim, occupancy or vacancy control, daylight harvesting, time delay, and personal control.
The app supports optional offsite pre-planning, while app pairing allows initial setup and subsequent adjustments. No hubs, gateways, or routers are required, and over-the-air firmware upgrades are available through the app.
Snap-In PIR Detection
Wireless PIR motion sensing with mounting and detection ranges up to 17 feet.
App-Based Commissioning
Configure areas, groups, zones, profiles, trims, occupancy settings, daylight harvesting, and time delays.
Hub-Free Bluetooth Mesh
Creates a Bluetooth Mesh network without requiring hubs, gateways, or routers.
Features & Benefits
- QSR snap-in wireless PIR motion sensor designed for Network Lighting Controls.
- Uses SIG Qualified Bluetooth Mesh for wireless network communication.
- MES iOS and Android apps support onsite setup and commissioning.
- Areas, grouping, and zoning can be configured through the mobile app.
- Profiles support high- and low-end trim, occupancy or vacancy, daylight harvesting, time delay, and personal control.
- MES Web App supports optional offsite pre-planning and profile creation.
- No hubs, gateways, or routers are required to create the mesh network.
- The sensor pairs with the app for initial setup and subsequent adjustments.
- Additional BLE devices such as controllers, sensors, range extenders, and timekeepers can be incorporated.
- Over-the-air firmware upgrades are available through the app.
Construction
- Snap-in wireless PIR motion-sensor design
- Housing Material: UL 94-5VA
- Integrated PIR motion sensor
- Integrated Bluetooth version 4.2 radio
Electrical
- Input Voltage: DLC 12V
- Input Current: 25mA maximum
- Radio Frequency: 2.4GHz ±75Hz
- Bluetooth Transmit: 80 ft maximum
- Bluetooth Version: 4.2
- Operating Temperature: â22°F to 131°F (â30°C to 55°C)
- IP Rating: IP20
Optics
- PIR motion detection
- Maximum Mounting Height: 17 ft
- Maximum Detection Range: 17 ft
Mounting
- Snap-in fixture-mounted design
- Mounting Height: 17 ft
- Fixture-wall thickness shown: 0.7â0.9mm (0.0276â0.0354 in)
Controls
- Onsite commissioning
- Area, grouping, and zoning setup
- High- and low-end trim
- Occupancy or vacancy control
- Daylight harvesting
- Time-delay configuration
- Personal control
- Optional offsite pre-planning through the MES Web App
- App pairing for initial setup and subsequent adjustments
- Over-the-air firmware upgrades through the app
Operations
Warranty
- 5-Year Product Warranty
Listings & Certifications
